Pretty Garden of pallets

 Garden of pallets 

Country house without built next to the gazebo will look lonely and unattractive. There are many ways to design this construction. One of them is the use of conventional transport pallets or pallets. 

Preparation for construction 

Before gazebo built from pallets begin, you need to choose the most trays. Naturally, you need to select them thoroughly, ensuring their durability and strength. Once the pallets are selected, you need to clean them from dirt and rotten wood. 

Once the cleaning is carried out, the pallets should be treated with protective materials. From what these materials have to protect? From moisture, dirt, sun and, of course, insects. After processing the materials for the future of the house they need to make beautiful. This can be accomplished using paint or varnish for wood. It all depends on your pans design. You can also use stains on wood. It perfectly sets off the wood structure obscures it or, on the contrary, brightens. 

The process of building 

Any construction begins with the construction of the foundation. Depending on the size of the arbor is determined, and the feasibility of the foundation. If small gazebo is planned, the foundation can be prenebrech. A if large, it is best to use a screw-pile foundation. It is cheaper and easier tape is being built. 

When there is no foundation to the floor structure have to do a kind of pedestal of the high board. This is done in order to lower sexual pallets do not pollute and are not exposed to moisture. 

After erection of the foundation, or a wooden pedestal comes time for major works with pallets. This will require: 

* Pallets. 

* Thick wooden beams for the frame. 

* Screws for mounting-grouse pallet and timber. 

* Cry for mounting-screws grouse. 

* Measuring tools: ruler, level and tape measure. 

Of timber frame needs to be done. With the help of measuring the level of evenness of vertical monitor. On this depends not only attractive appearance construction, but also its durability. Squares are interconnected by means of screw-grouse. With the help of the same fixing material is a compound, and pallets themselves, both among themselves and with the timber. 

Depending on the purpose of arbors, the walls can be made as a single row of pallets, and of the two. In the latter case the obtained thick wall with minimal penetration of sunlight, but also with maximum protection from wind and rain. 

The roof is also made of pallets. To protect against precipitation it is possible to cover additional roofing material: slate, tiles, boards, etc. It is possible to restrict a camouflage net... This will give a special atmosphere. 

In any case, no matter what variation you choose, the house for the rest of the pallet - an excellent choice for enjoying the outdoors.